1. Beathú: De réir riachtanais an phlean slitting, de réir na rialacha oibríochta tiomána, agus de réir an staid iarbhír, croch na rollaí tuismitheora comhfhreagracha ar an bhfráma ag dul in aois, agus cuir iad ar fhráma díscaoilte an mheaisín slitting de réir go dtí an treo roghnaithe ar an taobh istigh agus lasmuigh den dromchla corónach. Teann an cnaipe rialaithe an croí cruach, fágann sé an lámh tacaíochta croí cruach agus taistealaíonn sé.
2. Poll an scannáin: Nuair nach bhfuil aon scannán ar an meaisín slitting gantry, ní mór é a tholladh. Ag baint úsáide as an bhfeiste snáithithe scannáin agus eochair fheidhm an mheaisín slitting, ceangail foirceann amháin den scannán bunaidh le súl fáinne an tslabhra snáithithe scannáin, agus gníomhaigh an cnaipe snáithithe scannáin, ionas go mbeidh an scannán dáileadh go cothrom ar gach sorcóir feadh an treo den phróiseas slitting.
3. Film connection: When there is film on the gantry slitting machine and the reel joint is changed, the vacuum film connection table is used to start the film connection table to the working position, and the film on the traction roller of the slitter is manually flattened and the upper vacuum pump is started. Suction the film, make the film evenly adsorbed on the film receiving table, paste the double-sided tape and cut off the excess film under the tape, flatten the film on the unwinding rack and start the lower vacuum pump to make the film flat and adsorb, take off the tape Apply the paper layer and level the adhesive film, the joints should be neat and wrinkle-free, then turn off the upper and lower vacuum pumps, and open the film connection table to the non-working position.
